Ground Joint Coupling

 Our ground Joints provide a convenient NPT threaded fitting for high pressures.

The spud portion of the fitting is usually fixed permanently to the equipment, and the stem and nut attached to the hose are the other half. The wing nut on the spud can be rotated to easily achieve the seal on a tapered seat.

Our Ground Joint coupling is steel plated.

 

Ground Joint Coupling - Wing Nut

Ground joint fittings are designed for high pressure air or water (ie. Up to 500 psi) as well as steam (steam maximum 250 psi @ 450°F max) in plants, refineries, construction sites, or drilling applications.

Ground Joint Coupling - Female Spud

Ground Joint female spud is included in the female hose coupling set. Purchase additional female spuds to convert additional equipment, pipe, and manifolds to ground joint wing nut thread.

Ground Joint Coupling - Hose Stem

Ground Joint Coupling-Hose Stem are to be installed by a fully trained assembler and are designed to be used with interlocking bolt clamps.

Ground Joint Coupling - Male Spud

Ground Joint Male Spuds can be used to connect female ground joint hose couplings to threaded manifolds, valves, and equipment. Thread the NPT side to any pipe threaded connection and then swivel a female ground joint wing nut onto the other end.

Ground Joint Coupling - Double Spud

Ground Joint Double Spuds are used to connect hoses with female ground joint couplings together. Each side has the ground joint wing-nut thread and special polymer seal.

Ground Joint Coupling - Male Stem

Detailed information about ground joint coupling- male stem including its application and recommended hose attachment.

 

As a professional rubber pipes suppliers, Suzhou Seapeak Co., Ltd., has high-quality pvc layflat hose for sale. Welcome to contact us if needed.

 

 


评论

发表评论

此博客中的热门博文

Agricultural

图片
Agricultural Our water belts are widely used in agriculture. Generally, it can be divided into 4BAR, 6BAR, 8BAR, 10BAR, 13BAR, 16BAR from the working pressure; PVC, polyurethane and rubber agricultural irrigation hose are separated from the lining material; the diameter is 1/4", 1/2", 3/4", 1" , 1 1/2", 2", 2 1/2", 3", 4", 5", 6", 8", 10", 12", 14" and 16". Common water belt lengths are 15M, 20M, 25M, 30M, 50M, 100M and 200M. How to use the agricultural water belt? 1. After the water belt is used, it should be cleaned, the lining water belt should be hung, and then the coil should be stored in a cool and dry place; 2. If the agricultural lining water belt is found to have a small mouth during use, Wrap the water belt and weave or glue it as soon as possible; when there is obvious damage, it should be replaced immediately; 3. When laying the water belt, if it needs to pass the railway, it should pass u...
阅读全文

Camlock Coupling

图片
  camlock fitting typesCam & groove coupling is very easy to use.  In general, camlock coupling has two kinds of adapter: male and female. You just need insert the male into the female until contact is made with the gasket. Then press down the cam arms simultaneously to produce a uniform gasket compression. During the process of installation, no tools are required and hand pressure is enough. Hence, camlock hose coupling   not only save your time but also the tools and human power. As one of the most professional camlock coupling manufacturer , SUZHOU SEAPEAK has a camlock part factory which can ensure the production of different types of camlock fittings in different materials. Our camlock fittings includes PVC camlock coupling , aluminum camlock coupling, brass male camlock coupling , etc. Click and check more about camlock coupling types   below.   As a professional hose fittings manufacturers , Suzhou Seapeak Co., Ltd., has high-quality pvc hose china ...
阅读全文

Hose

图片
  Jacket Fire Hose Color of jacket: white, red, yellow, green, black, grey and so on. Lining: natural rubber , PVC, EPDM , PU and so on. Layer of jacket: single or double Size: 1”-8” Working pressure: 10bar-30bar Standard length: 15M, 50FT, 20M, 75FT, 30M, 100FT, 50M, 60M   Overview of Jacket Fire Hose The hand jack fire hose  is made of the polyester jacket and lining. The polyester jacket is constructed of warp in polyester staple and weft in the polyester filament. The layflat fire hoses for sale at SeaPeak are very flexible and resist high pressure. It has good resistance in rolling and age. Special adhesive is applied between the jacket and lining. Therefore, the adhesive strength is greatly improved. After a long time of use, the lining is not separated. The main features: are light, flexible, good adhesive strength, and long service life.   Features of Jacket Fire Hose Durable Construction   High-Pressure Performance   Flexible and Lightweight  ...
阅读全文